Home Products1-10V Dimmable LED Driver

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

Certification
Good quality Dimmable Motion Sensor for sales
I'm Online Chat Now

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

China ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output supplier
ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output supplier ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output supplier

Large Image :  ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

Product Details:

Place of Origin: China
Brand Name: Merrytek
Certification: SEMKO /CE /RoHS
Model Number: ML50C-PV

Payment & Shipping Terms:

Minimum Order Quantity: 100pcs
Price: Negotiation
Packaging Details: Packed in bubble bag firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Payment Terms: T/T or western Union or PayPal
Supply Ability: 10,000pcs per month
Contact Now
Detailed Product Description
Output Voltage: 68Vdc Max Input Voltage: 220-240Vac
Dimming Mode: 0-10V,push Production Name: Dimming Led Driver
Output Current: 350-1050mA Selectable Via DIP Switch Input Current: 0.26mA Max
Output Load Range: 50W Max Protection Class: IP20
Life Time: 50000hours Certification: SEMKO /CE /RoHS

ML50C-PV  1x50w 0-10V and push dimmable led driver 350mA to 1050mA multi-output 123x79x23.5mm for LED Panel Light

 

Feature

1, Output current and output voltage can be set by DIP switches, constant output current range from 350mA to 1050mA

2, Two circuit design AC-DC-DC, no flicckering in dimming 2%-100%

3, Stand-by power below 0.5W

4, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface

5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required

6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores

7, Synchronization: thanks to the MCU programme, up to 15pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch

8, Maximum length of the cable, from switch to last driver is 20m

9, Factory setting: 100% dimming level and 350mA output

10, Dim via a potentiometer

11, Support master-slave grouping net work

12, Protection: Short circuit / Over voltage / Over temperature

13, Long life span 50,000h, 5 years guaranty

14, Derating current for over high ambient temperature

 

Mechanical Specification

 

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2.1-10V dimming (see wiring diagram, Fig C)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C

 

Specifications

 

 

INPUT

 

Input voltage 220-240Vac
Input frequency 50-60Hz
Input current 0.26A max
Power factor (Note 1) ≥0.90
Efficiency(Note1) ≥86%
Stand-by power (Note 2) ≤0.5W

 

 

 

OUTPUT

 

Output current/ voltage

350mA 6~60V DC 21W max.; 500mA 6~58V DC 29W max

550mA 6~58V DC 31.9W max.; 650mA 6~58V DC 37.7W max.

700mA 6~58V DC 40.6W max.; 750mA 6~56V DC 42W max

850mA 6~56V DC 47.6W max.; 900mA 6~56V DC 50.4W max

1050mA 6~48V DC 50.4W max.

12V (0~1050mA) 12.6W max.; 24V (0~1050mA) 25.2W max.

Output load range 50.4W Max.
Current accuracy ±5%
Dimming mode 1-10V, PUSH

 

 

ENVIRONMENT

 

Working temp.(Ta) -20~50℃
Surface temp.(Tc) 85℃max
Working humidity 20~85%RH non-condensing
Storage temp. -40~80℃
Life time ≥50000hours

 

PROTECTION

 

Isolation class Class Ⅰ
Protection class IP20
Over voltage 300Vac, 2H
Short circuit Protection type; auto reset
No-load Protection type; auto reset
Over temperature Protection type; auto reset

 

 

 

OTHERS

 

Safety EN61347-1 EN61347-2-13
EMC EN55015, EN61000-3-2
EN61000-3-3, EN61547
Approvals SEMKO, CE, RoHS
Withstand voltage IN-OUT:3.75KVAC/5mA/1min
Dimension (L x W x H) 123x79x23.8mm
Connection

Press-in type terminals, 0.75-1.5mm2

Input: L, N, PUSH, PE

Output: SEC(+) SEC(-), 1-10V(+),1-10V(-)

 

NOTE

Note:

1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.

Applications

For LED panel light, LED down light, led strip, led tube etc…

 

 

Wire diagram

 

Contact Details
Shenzhen Merrytek Technology Co., Ltd.

Contact Person: june zhao

Send your inquiry directly to us (0 / 3000)

一本到高清无码在线2区,一本道hezyo综合在线,国产av偷拍在线,日本无码v一本道a天堂