Home Products1-10V Dimmable LED Driver

1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc

Certification
Good quality Dimmable Motion Sensor for sales
I'm Online Chat Now

1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc

China 1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc supplier

Large Image :  1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc

Product Details:

Place of Origin: China
Brand Name: Merrytek
Certification: SEMKO / CE/ RoHS
Model Number: ML10C-PV1

Payment & Shipping Terms:

Minimum Order Quantity: 100pcs
Price: Negotiation
Packaging Details: Packed in bubble bags firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days 2, Bulk order: within 3-4 weeks
Payment Terms: T/T, Western Union, PayPal
Supply Ability: 20,000pcs per Month
Contact Now
Detailed Product Description
Product Name: 10w 1-10V & Push Dimmable Led Driver Input Voltage: 220-240Vac
Dimming Mode: 1-10V,push Dim Output Current: 700mA
Output Voltage: 3-15Vdc Dimming Range: 2%~100%
Life Time: 50,000 Hours IP Rating: IP 20
Working Temperature: -25℃-50℃ Protection Class: IP20

1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc

 

 

Description

 

1,  Adapt the Flicker-free programming,flicker rate less than 2% tested by professional equipment

2, Output constant current 700mA,currency rate ±5%

3, Two circuit design AC-DC-DC, no flicckering in dimming 2%-100%

4,  Dimmable LED driver with PUSH DIM, and 1-10V dimming interface.

5,  Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

6,  Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

7,  Maximum length of the cable, from switch to last driver is 20m.

8,  Press-in terminals in primary and secondary side, easy assembly.

9,  Protection: Short circuit / Over voltage / Over temperature.

10,  Long life span 50,000h, 5 years guaranty.

11,  It can matches with Merrytek MS01(daylight sessor) and MC003V( microwave motion sensor ) to achieve auto on-off, dimming and daylight funcion

 

1x10w Push 1-10v led dimmer switch ML10C- PV1For 700mA Output 6-14Vdc

 


 

Specifications

 

 

 

INPUT

 

Input voltage 

220-240Vac

Input frequency 

50-60Hz

Input current 

0.06A max

Power factor 

≥0.90

Efficiency(Note1)

≥82%

Stand-by Power (Note2)

≤0.5W

 

 

 

OUTPUT

 

Output current/voltage

 and load

700mA 3-15Vdc 10.5w max

Output load range 

1x10.5W max

Current accuracy 

±5%

Dimming mode

1-10V, PUSH

 

 

ENVIRONMENT

 

Working temp.(Ta) 

-20~50℃

Surface temp.(Tc) 

85℃max

Working humidity 

20~85%RH non-condensing

Storage temp. 

-40~80℃

Life time 

≥50000hours

 

PROTECTION

 

Isolation class 

Class II, SELV

Protection class 

IP20

Short circuit 

Protection type; auto rest

Over voltage

Protection type; auto rest

Over temperature

Protection type; auto rest

 

 

SAFETY&EMC

 

Safety 

EN61347-1 EN61347-2-13 EN60598-1 EN60598-2-6

EMC 

EN55015, EN61000-3-2ClassC

EN61000-3-3, EN61547

Approvals 

SEMKO, CE, RoHS

Withstand voltage

IN-OUT:3.75KVAC/5mA/1min

OUT-FG:500VAC/5mA/1min

 

NOTE

Note:

1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.

 

Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2. 1-10V dimming (see wiring diagram, Fig B)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig B

 

Wiring Diagram:

 

 

 

Applications:

 

For downlights in lobby,corridor

Contact Details
Shenzhen Merrytek Technology Co., Ltd.

Contact Person: june zhao

Send your inquiry directly to us (0 / 3000)

一本到高清无码在线2区,一本道hezyo综合在线,国产av偷拍在线,日本无码v一本道a天堂